3M™ Scotch-Weld™ EPX Concrete Repair Mixing Nozzle, 8.4 oz, (3 Nozzles/Each) 12 Each/Case

$4.79 / Each

SKU	7000046642
Legacy SKU	62963799358
UPC	00048011533827
Catalog Number	NOZZLE
Product Number	Mix Nozzle

Choose 3M Scotch-Weld EPX Mixing Nozzles for efficient application of 3M Scotch-Weld Structural Adhesives in Duo-Pak (DP) cartridges. Each nozzle provides thorough mixing and precise placement of two part adhesives and potting compounds.

Provides thorough mixing and precise placement of two-component structural adhesives
Tapered tip can be cut for bead size
Available in a variety of designs to fit all cartridge sizes
Minimize adhesive waste; easy to replace with new nozzle to use remaining adhesive in a cartridge
Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing

Add to cart

Easy To Use

Incredibly Versatile

Fast Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0.0919 lbs
Width	6-3/4 in
Length	1 in
Height	3.81201 in

Shipping Dimensions
Weight	1.45 lb
Length	10.2 in
Width	8 in
Height	4.9 in

PRODUCT FAQ

What is the 3M™ Scotch-Weld™ EPX Concrete Repair Mixing Nozzle used for?

The mixing nozzle is designed specifically for use with our EPX system, and making accurate mixed applications of your concrete repair material easy.
How many nozzles come in a case?

A total of 36 nozzles come shipped per each order when you purchase them wholesale by the case.
What are some of the features and benefits?

One key feature is that it provides good mixing ratio control. Other benefits include less waste due to its ability to easily dispense only what you need while maintaining an accurate mix ratio each time.
Can I reuse these nozzles between different types of concrete adhesive products?

Since there may be cross contamination between adhesive types if reused from one product to another (or from unopened tubes back into their original package), we do not recommend reusing any mixing nozzles for this reason.
Are there any precautions or storage tips I should keep in mind before using these?

. We recommend storing on-site neither too hot nor cold temperatures, away from heat sources; shake vigorously after prolonged storage periods just prior to opening/sealing cap. When done using, remove excess resin by giving product pressure surges through applicator tip. Lastly store upright and at room temperature while properly sealed until ready to use next time!

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000046642 | 3M™ Scotch-Weld™ EPX Concrete Repair Mixing Nozzle

UPC 00048011533827 | 3M™ Scotch-Weld™ EPX Concrete Repair Mixing Nozzle

Product Number Mix Nozzle | 3M™ Scotch-Weld™ EPX Concrete Repair Mixing Nozzle

Provides Thorough Mixing and Precise Placement

3M™ Scotch-Weld™ EPX Mixing Nozzles are designed to meet exact requirements for easy and uniform application. These accessories are approved by 3M and work with 3M Duo-Pak cartridges to simultaneously meter, mix, and apply two-part adhesives and potting compounds. The tapered tips can be cut for precise bead size.

Recommended Applications

Attach to 3M Duo-Pak structural adhesive cartridges
Dispense with 3M EPX Manual or pneumatic applicators

Minimizes Adhesive Waste

Any leftover adhesive can be stored with the used nozzle in place to provide a good seal. When ready, replace it with a new nozzle to continue using the remaining adhesive in the cartridge.

Choose original 3M accessories to ensure the accurate performance of 3M™ Scotch-Weld™ EPX Applicators for the ideal system for assembly, maintenance, and in-field service.

Bringing Better Ideas to the Surface through Science and Innovation

The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. Ultimately, these technologies help customers deliver competitive products to the market faster and more efficiently.