3M™ Weatherban™ Ribbon Sealant PF 5422, Black, 3/8 in x 1/8 in x 50 ft, 24 rolls/Case

$36.43 / Roll

SKU	7000046617
Legacy SKU	62542201041
UPC	00021200835056
Catalog Number	PF 5422
Product Number	PF5422

3M Weatherban Ribbon Sealant PF 5422 is a thread reinforced preformed butyl rubber sealant tape. It offers a watertight, gasket-like seal around window and door frames and glass bedding applications. This sealant can also act as a metal seam sealer in overlap seams, building panels, rain gutters, and can be used in conjunction with mechanical fasteners.

Thread-reinforced butyl tape
Repositionable without cleanup
Weather resistant
Maintains tack at temperatures as low as 40°F / 5°C, permitting application in unheated areas
Stays in position on vertical or overhead surfaces
May be positioned side by side to achieve varying widths

Add to cart

Multiple Application Use

Excellent Sealing Qualities

Weatherproof

Global Shipping

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	44.5907 lb
Length	13.89764 in
Width	13.89764 in
Height	13.77953 in

Color	Black

PRODUCT FAQ

What is 3M™ Weatherban™ Ribbon Sealant PF 5422 used for?

The 3M™ Weatherban™ Ribbon Sealant PF 5422 is a self-adhered, compressible tape seal that is designed to be used on metal building panels and roofs.
Is the sealant easy to apply?

Yes, the sealant is very easy to apply. It can be applied by hand and requires no special tools or equipment.
How long does the sealant last?

The lifespan of the sealant depends on weather conditions and other environmental factors but it typically provides a highly durable bond for many years.
How much product is included per case of 24 rolls?

The product comes in cases of 24 rolls with each roll being approximately 50 feet in length so you'll receive a total length of around1200 feet.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000046617 | 3M™ Weatherban™ Ribbon Sealant PF 5422

UPC 00021200835056 | 3M™ Weatherban™ Ribbon Sealant PF 5422

Offers a Flexible Bonding and Sealing Solution

3M™ Weatherban™ Ribbon Sealant PF 5422 offers outstanding resistance to weathering, and develops good adhesion to glass, metal, and most other surfaces. It is often used for applications demanding high tack, aggressive adhesion, weather resistance and flexibility. Protective liner and sealant are different widths for easy release, with no special equipment required for application. Sealant stays in position on vertical or overhead surfaces, and is repositionable during application. It builds aggressive adhesion over time.

Recommended Applications

Used for applications demanding high tack, aggressive adhesion, weather resistance and flexibility

Easily Applied by Hand

Prior to applying 3M™ Weatherban™ Ribbon Sealant PF 5422, the surface should be free from dust, dirt, grease or other contamination. The temperature of the sealant and surfaces to be bonded should be 40°F / 5°C or above. PF 5422 comes in roll form on a liner. Simply lay or press the sealant in place, remove and discard the liner. The sealant may be positioned side by side to achieve varying widths.

Cleanup can be accomplished with a solvent such as 3M™ Scotch-Grip™ Solvent No. 2 or 3M™ Citrus Base Industrial Cleaner (sold separately).

Bringing Better Ideas to the Surface through Science and Innovation

In the 3M Industrial Adhesives and Tapes Division, they apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, their technologies help customers like you deliver competitive products to the market faster and more efficiently.