Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 360, 10/Carton, 40 ea/Case

$8.63 / Each

SKU	7000046182
Legacy SKU	61500187903
UPC	00048011332277
Product Number	RB-ZB

Scotch-Brite Radial Bristle Disc, using proprietary 3M Ceramic Abrasive Grain and molded, flexible bristles, provides more surface contact than wire brushes and maintains abrasive property throughout the life of the disc. This fast-running disc removes paint, stains, adhesives, weld burns, rust, heavy oxides, and surface contaminants from large areas.

Molded, abrasive-filled bristles strip, deburr, blend, finish, polish, clean, and remove coatings more effectively, with less pressure than wire brushes
Proprietary 3M™ Ceramic Abrasive Grain provides aggressive cutting and consistent finish quality throughout the life of the disc
Flexible bristles require less pressure than wire brushes and conform to contours, even on complex parts
Bristle spacing is ideal for coating removal and other high-loading substances
Contains no wire filaments for improved safety

Add to cart

Superior Cutting

Durable

Versatile

Easy To Use

Product Dimensions	Imperial	Metric
Weight	0.2903 lbs
Width	0 null
Length	0 null
Height	0 null
Center Hole Diameter	0.37 in	9.398 mm

Shipping Dimensions
Weight	1.3 lb
Length	7.1 in
Width	3.8 in
Height	4.20984 in

Color	Lime
Maximum Speed	20,000 rpm

PRODUCT FAQ

What is the Scotch-Brite Radial Bristle Disc used for?

The Scotch-Brite Radial Bristle Disc is used for deburring, finishing, cleaning and polishing. It can be used on a wide range of metals like brass, aluminum, stainless steel among others.
How long does it last?

The 3M™ 3 in x 3/8 in Scotch-Brite™ Radial Bristle Disc typically lasts longer than traditional sanding discs! On average, each disc should give you between 10 to 50 hours of use depending on the application. So you won't need to replace them very often.
Can it be reused or washed?

Yes! These radial bristle discs are designed with ceramic abrasive grain particles that do not break down and attract dust during usage. As such they can be cleaned using air blasts or running water after usage therefore increasing their longevity helping save customers money over time!
Is there any prep work I will need if I want to get started with this product?

The only prep work needed before beginning working with your new radial bristle disc would depend on what/how you plan to use it as these come color-coded based on grit level finer grits (for a polish-type finish) may require rougher "scratching" prior surfaces etc but generally speaking no additional processes outside mounting onto an appropriate spindle-mounting system would be necessary.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000046182 | Scotch-Brite™ Radial Bristle Disc

UPC 00048011332277 | Scotch-Brite™ Radial Bristle Disc

Product Number RB-ZB | Scotch-Brite™ Radial Bristle Disc

Scotch-Brite™ Radial Bristle Disc

Under normal use, the flexible bristles on the Scotch-Brite™ Radial Bristle Disc remain safely in place and can achieve the desired finish using light pressure. This disc is designed to last longer than wire and other abrasive discs and works well on aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and other metals. It is used for general industrial, aerospace, automotive, metalworking, transportation, and automotive applications.

3M™ Ceramic Aluminum Oxide Blend

3M™ ceramic aluminum oxide blend is a ceramic mineral designed using a proprietary process to enhance toughness and hardness of the grain for a higher level performance. Ceramic aluminum oxide blend is engineered to fracture frequently and surpasses aluminum oxide abrasives in both cut-rate and durability. Perfect for moderate to heavy stock removal as well as finishing, ceramic abrasives are built to cut fast and handle intense heat and stress applications.

Scotch-Brite™ Abrasives

Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.