SKU | 7000028515 |
---|---|
Legacy SKU | 61500151735 |
UPC | 00048011276281 |
Product Number | 27628 |
3M Flange Adapter holds together a minimum of seven 6 inch radial bristle discs for use on bench motors with a shaft size of 1 inch diameter.
- Two-piece flange adapter holds a minimum of 7 bristle discs
- 1 inch hole optimizes mounting of 6 inch bristle discs on bench motors with a 1 inch diameter shaft
- 3M™ Telescoping Wheel Flange Adapter (Part No. 5, sold separately) can be inserted in the center hole to adapt to shaft sizes as small as 1/2 inch diameter
- Can be used with one or more 3M™ Spindle Extender Adapters (Part No. 30134, sold separately) when additional layers of bristle discs are required
Product Dimensions |
Imperial | Metric |
Weight | 0.08 lbs | |
---|---|---|
Width | 5 in | |
Length | 1/4 in | |
Height | 8 in | |
Diameter | 2 in | 50.8 mm |
Center Hole Diameter | 1 in | 25.4 mm |
Shipping Dimensions |
|
Weight | 2.20903 lb |
---|---|
Length | 8.30709 in |
Width | 8.30709 in |
Height | 5.59055 in |
Color | Maroon |
---|
PRODUCT FAQ
-
What is the 3M™ Flange Adapter- 6 in Radial Bristle Brush Set used for?
The 3M™ Flange Adapter- 6 in Radial Bristle Brush Set is mainly used to deburr and clean hard-to-reach areas on metal, such as pipes, tubing, and internal bores.
-
How many brushes are included?
You get a total of 25 brushes per case. Each brush measures at about 2 inches x 1 inch.
-
Is the set compatible with any rotary tool or only specific ones?
This brush set is designed to fit snuggly onto any standard flange adapter that fits a six-inch diameter wheel. So as long as your rotary tool has this type of adapter installed onto it, you'll be good to go.
-
Are the bristles made from nylon or steel?
This particular brush set features radial bristle discs with silicon carbide abrasive embedded throughout each disc. These discs come equipped with flexible rubber holders that gently contour around curved surfaces without scratching them up.
-
Can these brushes be reused after they have been worn down?
While we don't endorse reusing worn-out tools, some customers do choose to reuse them anyway - so yes! These brushes can technically be reused again until complete wear happens (indicated by either all disintegrated bristles or peeling rubber holders).
Product Description
For bench motors with shafts smaller than 1 inch, a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 1/2 inch, 5/8 inch, 3/4 inch or 7/8 inch shafts.
When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.