Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

3M™ Weld-Thru Coating II, 05917, 12.75 oz Net Wt/361 g, 6 per case

3M™

$36.29 / Canister

SKU 7000000638
Legacy SKU 60980107779
UPC 00051131059177
Catalog Number 05917
Product Number 05917

3M Weld-Thru II is a convenient aerosol coating designed to prevent corrosion between welded metal surfaces. Featuring a zinc base that draws corrosion away from bare metals, it helps prevent costly comebacks due to corrosion at welds. Spray coating applies fast, resists weld spatter common to some weldable primers and dries in as little as 5 minutes, increasing shop efficiency and productivity.

  • PREVENTS COSTLY COMEBACKS: Protects bare metal panels and parts from corrosion after welding
  • ZINC BASE: Draws away contact corrosion, leaving substrates strong
  • CONVENIENT AEROSOL SPRAY: Applies fast to increasing shop efficiency and productivity
  • QUICK DRYING: Dries in as little as 5 minutes before MIG welding for efficient throughput
  • MINIMUM WELD SPATTER: Special formulation helps prevent shop damage
  Add to cart
On it's way to you November 12   

Qty

Minimum Order 6 Canisters
Order Increment 6 Canisters
  Multiple Application Use
  Heat Resistant
  Durable
  Fast Shipping
Product Dimensions
 Imperial Metric
Weight 1.10011 lbs
Width 2.67992 in
Length 2.68 in
Height 6-1/4 in
Shipping Dimensions
Weight 6.8696 lb
Length 8.70079 in
Width 5.86614 in
Height 8.54331 in
Color Gray

PRODUCT FAQ

  1. What is 3M™ Weld-Thru Coating II, 05917 used for?

    3M™ Weld-Thru Coating II, 05917 helps to minimize corrosion and reduce spatter on surfaces that are spot welded. This coating can withstand the high temperatures of welding and won't burn off.

  2. Is it compatible with all types of metals?

    Yes! This coating works well on all types of metals like steel or aluminum. It provides excellent bonding even on galvanized metal to support long-term paint adhesion performance.

  3. How do I apply this product?

    To get the best results, you should apply a thin layer evenly over the intended spot prior to welding using an applicator gun with its adjustable nozzle. For easier handling, always shake well before use as settling could occur after storing for some time.

  4. Will it affect my weld quality in any way?

    No, when applied properly in accordance with recommended procedures and allowed to dry completely —which takes about five minutes—this product doesn't influence weld strength or continuity but supports proper penetration without affecting the final finish's appearance.

  5. : Do you provide customer service & troubleshooting assistance?

    A : Absolutely! We take pride in answering our customers' questions promptly by phone or email so feel free to contact us if your question was not answered here or if you have any issue regarding this product; we love helping our customers!

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Weld-Thru II 05917

3M™ Weld-Thru II 05917

3M™ Weld-Thru II 05917 is a convenient aerosol coating designed to prevent corrosion between welded metal surfaces. It features a zinc base that effectively draws corrosion away from bare metals, reducing the risk of costly comebacks caused by corrosion at welds.

The spray coating applies quickly and efficiently, saving time and increasing shop productivity. It also resists weld spatter commonly associated with some weldable primers. With a drying time of as little as 5 minutes, it allows for faster turnaround and improved shop efficiency.

Choose 3M™ Weld-Thru II 05917 for reliable corrosion prevention and enhanced welding performance.

Brochures, Catalogs & Data Sheets
  Add to cart