Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

3M™ Scotch-Weld™ Acrylic Adhesive Accelerator A3-2, Gray, Part A, 1 Gallon, 1 Can/Case

Scotch-Weld™

$1,113.48 / Canister

SKU 7100233358
Legacy SKU 62295975304
UPC 00638060408629
Catalog Number A3-2
Product Number A3-2

3M Scotch-Weld Acrylic Adhesive Accelerator A3-2 is the accelerator (Part A) of a two-part acrylic adhesive, engineered to be used with a B/A system. 3M designed this accelerator to use with 3M Scotch-Weld Acrylic Adhesives DP8805NS, DP8810NS and DP8825NS. The fast rate of cure provides rapid strength build-up and produces tough, impact-resistant bonds.

  • FAST-CURING ACCELERATOR: Provides handling strength in 1-2 hours, depending on the product
  • HIGHLY DURABLE: Helps to promote impact-resistant bonds
  • STRONG AND RELIABLE: Provides fast strength build-up when combined in a 10:1 B/A mix ratio
  • ACCURATE APPLICATION: Non-sag formula helps control reliable product placement
  • MINIMAL SURFACE PREPARATION: Has a high tolerance for oily and unprepared surfaces
  • PRODUCT COMPATIBILITY: Compatible with the acrylic adhesive series: 8600, 8700, 8900
  Add to cart
On it's way to you July 9  

Qty

Minimum Order 1 Canister
Order Increment 1 Canister
  Immense Durability
  Superior Bond Strength
  Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 10.525 lbs
Width 6.6
Length 6.6
Height 7-1/2
Shipping Dimensions
Weight 10.525 lb
Length 7.9 in
Width 7.9 in
Height 9.1 in
Color Gray

PRODUCT FAQ

  1. What is 3M™ Scotch-Weld™ Acrylic Adhesive Accelerator A3-2?

    3M™ Scotch-Weld™ Acrylic Adhesive Accelerator A3-2 is a specially formulated accelerator used to speed up the cure of certain acrylic adhesives.

  2. What type of adhesives can I use with this accelerator?

    This particular accelerator is designed specifically for use with 3M™ Scotch-Weld™ Structural Plastic Adhesives DP8005 and DP8010.

  3. How do I apply this product?

    You apply a small amount of the accelerator to one surface of your adhesive bond, then allow it to dry before applying the adhesive. For best results, follow manufacturer's instructions carefully.

  4. . Is there any safety information that goes with using this product?

    . Absolutely! Make sure to read all directions and warnings on both the container label and SDS, including proper ventilation requirements and PPE recommendations.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Quick Rate of Cure Provides Fast Strength Build-Up

3M™ Scotch-Weld™ Acrylic Adhesive Accelerator A3-2 is an accelerator (Part A) that is designed to be mixed with the base (Part B) for a two-part acrylic adhesive, a B/A system (base acrylic adhesive sold separately). This accelerator has a 10:1 mix ratio and features an exceptionally fast rate of strength build-up, providing structural strength in minutes. The system is formulated to produce tough, durable, impact-resistant bonds as well as a non-sag adhesive for accurate application. These toughened products offer excellent shear, peel, and impact performance. They provide improved adhesion to many plastics and metals, including those with slightly oily surfaces. Selected, Part B, acrylic adhesives include: DP8805NS, DP8810NS, and DP8825NS.

Recommended Applications
  • Metalworking such as HVAC, appliance, sporting goods, and specialty vehicles
  • Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, and frame assembly
  • Bonding plastics, composites, and powder coats to metal
Formulated to Produce Tough, Impact-Resistant Bonds for Durability

3M™ Scotch-Weld™ Acrylic Adhesive Accelerator A3-2 is formulated as a part of a tough, reliable solution that quickly produces the shear, peel, and impact performance for those demanding applications that require fast results. For structural strength in minutes, look no further than the engineering of 3M, putting science to work.

Easy Adhesion with Acrylic

Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces, and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Brochures, Catalogs & Data Sheets
  Add to cart
Other Products in this Family