Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

3M™ PPS™ Series 2.0 Lid 26199, Standard/Large, 125 Micron Filter, 25 Lids/Pack, 1 Pack/Case

PPS™

$35.74 / Pack

SKU 7100135628
Legacy SKU 60455003610
UPC 00051131261990
Catalog Number 26199
Product Number 26199

3M PPS Series 2.0 Lids are designed for the next generation 3M PPS Series 2.0 Spray Cup System. A -turn locking system replaces our traditional PPS collar, letting you attach the lid to the hard cup with a quick twist. A domed design allows up to 3 oz of fluid below the filter, reducing inconsistent spray and sputter. Full-diameter filters and a wider fluid spout improve flow and filtration.

  • MORE STABLE CONNECTION – Wide spout adapter with four-point connection maximizes stability while spraying and makes cleaning easier
  • Features ¼-turn lid locking system, helping eliminate cross-threading and paint build-up
  • Full-diameter filters built into every lid maximize filtration and fluid flow
  • Domed design and wide spout allow up to 3oz (90 mL) to be held below the filter, reducing inconsistent spray due to air-entrapment and sputter
  • Large sealing plugs provide stable base – place cup upside down to keep filters wet during temporary sealing and protection
  • Adapter provides four points of connection to lid for stability and total confidence
  Add to cart
On it's way to you June 20   

Qty

Minimum Order 1 Pack
Order Increment 1 Pack
  Reduce Costs
  Reduce Paint Consumption
  Fast, Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Shipping Dimensions
Weight 1.763 lb
Length 10.25 in
Width 10.25 in
Height 8.5 in

PRODUCT FAQ

  1. What are the benefits of using 3M™ PPS™ Series 2.0 Lids 26199?

    Using 3M™ PPS™ Series 2.0 Lids helps you reduce solvent use, while at the same time increasing productivity and reducing cleaning time. The lids also help to prevent contamination.

  2. How many lids come in a pack of 3M™ PPS™ Series 2.0 Lids 26199?

    Each pack of these Series comes with approximately twenty-five (25) large/standard lids and one (1) case.

  3. Can I reuse these lids or is it for single-use only?

    These lid series is designed as disposable—mean for single-use only to minimize possible contamination issues that may occur from reused material as well as significantly saving time involved in cleaning the reusable cups/lids, promoting higher productivity through multitasking on different repair jobs instead all your energy focused on maintenance routines via cleaning.Learn more here -https://www.youtube.com/watch?v=K8oe1LqAbSQ

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M™ PPS™ 2.0 Spray Cup System Lids are an essential component of our all-in-one solution for measuring, mixing, filtering and spraying paint materials. These lids fit the standard or large PPS™ 2.0 paint cups and liners.

PPS™ 2.0 disposable lids feature improvements like a quarter-turn locking collar, domed design for better spray performance, wider fluid spout and redesigned adapter for a more stable connection with the paint gun. Each lid strains paint material with a built-in 125-micron filter, commonly used for waterborne paint materials.

Unlike with conventional aluminum or other metal paint cup systems, with PPS™ you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. And with a fresh lid and liner for each mix, there’s less risk of outside contamination.

By using this system, you can increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent vs. conventional paint cup systems. Specially designed PPS™ stainless steel metal adapters let you use the PPS™ 2.0 system with virtually any spray gun.

Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more.

Applications
Brochures, Catalogs & Data Sheets
  Add to cart