3M™ Cubitron™ II Flap Disc 969F, 40+, T27, 5 in x 7/8 in, 10 ea/Case

$8.27 / Each

SKU	7100104600
Legacy SKU	60440314577
UPC	00076308898441
Product Number	969F

3M Cubitron ll Flap Disc 969F is the ideal choice for medium to high-pressure applications like beveling, weld removal and edge deburring. By combining a durable polyester backing with 3M Precision-Shaped Grain, this long-lasting flap disc delivers a consistent, fast cut on a variety of metals while providing a smooth finish.

Ideal 3M flap disc for aggressive grinding applications like beveling, weld removal and edge deburring
Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
Durable polyester backing material stands up to high unit pressure applications
Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
Versatile flap disc is easy to use with a lower risk of gouging than fiber discs and bonded wheels
Great for applications where finish is important

Add to cart

Premium Deburring, Grinding and Finishing

For Right Angle Grinders

Long Lasting Performance

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0.32496 lbs
Width	5
Length	5
Height	5/8
Diameter	5 in	127 mm
Center Hole Diameter	7/8 in	22.225 mm

Shipping Dimensions
Weight	3.24961 lb
Length	8.85827 in
Width	5.74803 in
Height	6.14173 in

Color	Maroon
Maximum Speed	12,000 rpm

PRODUCT FAQ

What is the 3M™ Cubitron™ II Flap Disc 969F, 40+, T27, 5 in x 7/8 in made of?

The flap disc is made of ceramic abrasive material with a sturdy Y-weight polyester flaps.
What is the grit size of the flap disc?

The grit size of this flap disc is medium to course (40+) which makes it ideal for rough grinding and stock removal applications.
What type of work surfaces can I use this on?

This flap disc performs exceptionally well on stainless steel and other exotic metals. It's also suitable for use on carbon steel, mild steel, aluminum, cast iron, and fiberglass reinforced plastics.
How many pieces are included in one case?

One case comes with ten (10) pieces each sized at 5 inches by 7/8 inches, making it an ideal purchase for large projects or industrial applications where multiple discs will be needed.
Is there any special requirement to store this product?

You don't need any specific storage requirements; just keep them protected from moisture and away from direct sunlight. Also avoid stacking heavy objects over them while storing.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100104600 | 3M™ Cubitron™ II Flap Disc 969F

UPC 00076308898441 | 3M™ Cubitron™ II Flap Disc 969F

Product Number 969F | 3M™ Cubitron™ II Flap Disc 969F

Keeps Cutting After Other Discs Quit

3M™ Cubitron™ II Flap Disc 969F – powered by 3M Precision-Shaped grain and a tough polyester backing – is the highest-performing 3M flap disc for demanding applications like heavy grinding, edge deburring and beveling. It also features a grinding aid that helps it run cool to maintain cutting efficiency on heat-sensitive metals. All of these attributes make 3M™ Cubitron™ II Flap Disc 969F a good match for projects that require an equally durable and versatile abrasive disc.

Flap Disc Design

Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.

Powered by 3M Precision-Shaped Grain

3M™ Cubitron™ II Flap Disc 969F features proprietary 3M Precision-Shaped Grain – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously to expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.

Applications