through rough waters
Scotch-Brite™ SST Deburring Wheel, ST-WL, 7A Fine, 12 in x 3 in x 5 in, 1 ea/Case
$460.63 / Each
| SKU | 7010365990 |
|---|---|
| Legacy SKU | 61500089513 |
| UPC | 00048011164182 |
| Product Number | ST-WL |
The Scotch-Brite SST Deburring Wheel is a higher density convolute wheel designed to remove sharp burrs and radius edges from stainless steel, titanium and other demanding alloys. Its conformability makes it ideal for use on intricate shapes and contours.
- Non-woven web construction resists loading and delivers fresh abrasive to the surface continuously
- Deburrs and finishes demanding alloys
- Higher density wheel that retains conformability for finishing intricate geometries and contours
Product Dimensions |
Imperial | Metric |
| Diameter | 12 in | 304.8 mm |
|---|---|---|
| Center Hole Diameter | 5 in | 127.0 mm |
Shipping Dimensions |
|
| Weight | 6.79906 lb |
|---|---|
| Length | 13.1 in |
| Width | 13 in |
| Height | 3.9 in |
| Color | Tan |
|---|---|
| Maximum Speed | 3,000 rpm |
PRODUCT FAQ
-
What type of materials can the Scotch-Brite™ SST Deburring Wheel work on?
The ST-WL deburring wheel is designed to work on stainless steel, titanium, and nickel-aluminum alloys.
-
Can this product be used for manual or automatic grinding operations?
This specific product is intended for manual grinding and finishing operations. However, we have many other 3M products that are ideal for automated processes.
-
How long does the Scotch-Brite™ SST Deburring Wheel last before needing replacement?
The lifespan of this wheel will vary based on a number of factors such as pressure applied, material type, and frequency of use. However, these wheels typically provide longer life than similar abrasive products while delivering consistent fine finishes.
The Scotch-Brite™ SST Deburring Wheel is a strong and durable wheel that can easily remove burrs and radius edges resulting from drilling, stamping, punching, and other machining operations without disturbing critical tolerances. It is widely used in the aerospace industry for deburring and finishing turbine blades and vanes, polishing and blending surgical instruments, and deburring aluminum die-cast flashing, among other uses.
These wheels are typically used on stationary machinery and are available in diameters of 4 inches and greater and widths up to 36 inches. SST wheels use fine grade silicon carbide or aluminum oxide abrasives. Silicon carbide is a sharp, hard synthetic abrasive that is ideal for cutting hard materials. Aluminum oxide is a hard, blocky mineral with a high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ convolute wheels are formed by wrapping layers of abrasive material around a central core. The three-dimensional web construction creates consistent finishes and can be used to radius edges. Synthetic fibers and abrasive particles are bound together to create an abrasive system that delivers consistent results for the life of the product. The open web construction continually exposes fresh abrasive to the work surface, for a consistent, smoother finish – without the risk of overworking the part and disturbing critical tolerances. It runs cooler and resists loading, extending the life of the product – all of which increase productivity.
Scotch-Brite™ wheels are one of the most complete selections of surface conditioning wheels and have been raising the bar for performance for over five decades.